Grout

Introduction

GROUT is a carefully prepared blend of Portland cement, graded aggregates, fortifiers and colour-fast pigments, it is designed for joint width 1mm to 3mm, for porous & absorbent type tiles, non-vitreous clay tiles, and marble & glazed wall tiles. Suitable for internal and external applications. 

  • Leak Prevention.
  • Increased Load-bearing Capacity.
  • Corrosion Resistance.
  • Soil Stabilization.
  • Sealing Off Cavities.
  • Structural Repair.
  • When the tiles/ stones have set firm, spacers and bottom support can be removed.
  • Add water into ratio of 1:4 and stir well.
  • Apply with the help of trowel.
  • Remove excess Grout from the tiles.
  • Leave them to dry.
S.NoProductPhysical AppearanceColorLayer ThicknessCoverage on Plane SurfaceInitial Setting TimeFinal Setting TimeShelf LifePacking
1GroutPowderMultiple Shades1.5 mm25 sqft/KG2 Hours24 Hours12 Months1 kg, 25 kg

** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application and surface roughness and porosity.

ProductGrout
Physical AppearancePowder
ColorMultiple Shades
Layer Thickness1.5 mm
Coverage on Plane Surface25 sqft/KG
Initial Setting Time2 Hours
Final Setting Time24 Hours
Shelf Life12 Months
Packing1 kg, 25 kg

** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application and surface roughness and porosity.

  • In case of eye contact quick wash with the plenty water.
  • Always wear the hand mask during the application.
  • Keep the surface free from any work for 24 hours after application.