P C No. 1

Introduction

P C No. 1 is the polymer based solution that creates a high level bonding between the Wall & Bricks.

 

It provides mechanical and chemical bonding.

  • Excellent cohesive chemical for wall, DPC & Bricks.
  • Fine Aggregate good mechanical bonding of wall.
  • Eliminating to reconstitute wall & bricks to make it reuse.
  • Ready to use nothing to be added at site.
  • Due to its red colour it is easy to identify the covered area.
  • During application. No post/no per curing required.
  • Ensure the substracte is free from wall putty & paint which was used before
  • Clean the surface from wired brush or sand paper.
  • Shake well before use make sure that the stone particles is completely mixed.
  • Do not add any amount of water.
  • Make sure that any tiny holes should not left.
  • After 24 hours you can proceed with paint & wall putty.
  • Coated surface should be plastered within 10 days.
S.NoProductPhysical AppearanceColorLayer ThicknessCoverage on Plane SurfaceInitial Setting TimeFinal Setting TimeShelf LifePacking
1PC No. 1LiquidRedSingle Coat <1mm10-15 sqft/KG8 Hours24-48 Hours12 Months1 kg, 5 kg, 10 kg, 20 kg
ProductPC No. 1
Physical AppearanceLiquid
ColorRed
Layer ThicknessSingle Coat <1mm
Coverage on Plane Surface10-15 sqft/KG
Initial Setting Time8 Hours
Final Setting Time24-48 Hours
Shelf Life12 Months
Packing1 kg, 5 kg, 10 kg, 20 kg
  • In case of eye contact quick wash with the plenty water.
  • Always wear the hand mask during the application.
  • Keep the surface free from any work for 24 hours after application of P C No. 1.