Wall Putty

Introduction

Sudershan Wall putty is a cement based material that is applied into a plastered wall before painting. It is used to fill the hairline cracks or pores any on the wall surface.

  • Can be applied directly on the plastered walls.
  • Provides leveled out surface ready for painting.
  • Ready to paint within 2-4 hrs.
  • Provides smooth and crack less surface for painting.
  • Improves the coverages of costly paint.
  • Curing less.
  • Fire Resistant.
  • Atains smooth velvet like seamless finish
  • Remove all the waste adhering material through a sand paper, putty blade or brush.
  • Surface should be wet before appling the putty.
  • Mix Sudershan Wall putty into water at ratio i.e. water : putty, 4:10
  • Mixing should be done through a mixer smoothly.
  • Apply Sudershan water mix Wall putty on the plastered wall through plain blade uniformly.
  • After drying ( 3-4hrs ) the Coat, rub the surface through a sandpaper and apply another coat.
S.NoProductPhysical AppearanceColorLayer ThicknessCoverage on Plane SurfaceInitial Setting TimeFinal Setting TimeShelf LifePacking
1Sudershan Wall PuttyPowderWhite<1mm15-20 sqft/KG10-12 minutes3-4 Hours12 Months5 kg, 20 kg, 40 kg

** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application and surface roughness and porosity.

ProductSudershan Wall Putty
Physical AppearancePowder
ColorWhite
Layer Thickness<1mm
Coverage on Plane Surface15-20 sqft/KG
Initial Setting Time10-12 minutes
Final Setting Time3-4 Hours
Shelf Life12 Months
Packing5 kg, 20 kg, 40 kg

** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application and surface roughness and porosity.

  • The surface should be line & length.
  • Keep putty in dry place.
  • Putty thickness should be less then 21mm
  • Apply putty before 4 Hours of paint.
  • Keep away from eye contact.
  • In case of eye contact immediate wash the eyes with plenty water